Firaki Car Jump Starter with Tyre Inflator, 150 PSI

₨ 13,995

The Firaki car jump starter with tyre inflator helps you top up low tyre pressure or start a compatible petrol car with a weak battery. The rechargeable unit combines a 150 PSI cordless compressor, battery jump starter, USB power bank and three-mode LED light. Set your target pressure on the dual digital display and the pump stops automatically when it reaches the setting. The unit recharges through USB-C.

Order via WhatsApp

Prefer to order manually? Chat with our team. Your order is confirmed only after we verify the details.

Delivery across PakistanRates and options shown at checkout
15-day returnsFor eligible items under our return policy
Order your wayCheckout online or enquire via WhatsApp

A Cordless Tyre Inflator and Jump Starter in One Unit

Use the Firaki car jump starter with tyre inflator to check and top up tyre pressure before a motorway trip or help crank a compatible petrol car when its battery is weak. The two functions share a rechargeable battery, so the compressor can run without a cable plugged into the car’s accessory socket. That makes it practical to reach all four wheels, use it on a motorcycle in the driveway or take it to a bicycle away from the car.

The unit has an ABS housing, measures 77 × 57 × 163 mm and weighs about 580 g. Keep the hose, valve adapters and jump-start leads together with the unit so you can find the part you need quickly. If you plan to rely on it during a trip, check the battery level and identify your vehicle’s jump points before you leave.

Digital Tyre Inflator with Automatic Shut-Off

The detachable air hose connects the compressor to the valve. Once it is attached, the dual digital display lets you compare the tyre’s current pressure with the target you have set. Start the pump and it switches off when it reaches that target. If you are checking several tyres, look at the front and rear values on your vehicle’s tyre placard before moving to the next wheel. Some vehicles specify different pressures for each axle or for different loads.

Choose from five modes for cars, motorcycles, bicycles, sports balls and manual adjustment. A preset gives you a starting point for the type of item you are inflating. Use manual mode when you want to enter a specific target, and check the stored value before reusing it. Switch between PSI, kPa, bar and kg/cm² to match the recommendation you are reading. Use a suitable valve adapter for a bicycle or an inflation needle for a ball.

The single-cylinder compressor is rated for 19 L/min airflow and up to 150 PSI. That maximum describes the pump’s pressure range. For everyday use, set the pressure specified by the vehicle, bicycle or ball manufacturer. A built-in fan helps manage heat during operation. Follow the manual’s run-time and cool-down limits when topping up several tyres in succession.

Emergency Car Battery Jump Starter

Use the jump-start function when a weak battery causes a compatible petrol car’s engine to crank slowly or fail to crank. The unit provides a brief boost for starting. Before connecting the leads, check the vehicle owner’s manual for the designated jump points. On some vehicles, the manual directs you to terminals under the bonnet even when the battery is mounted elsewhere.

Before use, check the Firaki manual for the supported vehicle battery system, engine type and engine size. The unit’s 14.8 V internal working voltage describes its own electrical system. Use the manual’s vehicle compatibility guidance when deciding whether it suits your car.

If the vehicle still fails to start within the attempts allowed by the manual, arrange assistance. If the engine starts but the battery repeatedly goes flat, have the vehicle’s battery and charging system checked.

USB Power Bank and Three-Mode LED Light

The USB output can give a compatible phone or small USB device a top-up when you are away from a socket. Use the appropriate cable for your device and keep enough charge in the Firaki unit for your planned roadside use. To recharge the Firaki unit itself, use the separate USB-C input and a charger that meets the manual’s input requirements.

The built-in LED offers steady, slow-flash and fast-flash modes. Use steady light to locate a valve cap, position the hose or read the markings around your car’s jump points after dark. The flashing modes can draw attention to your position while you are stopped. If you are dealing with a breakdown, follow the roadside safety instructions for your vehicle and use its hazard lights as appropriate.

Specifications

SpecificationDetails
BrandFiraki
Main functionsDigital tyre inflation, car battery jump-starting, USB power output and LED lighting
CompressorSingle-cylinder electric pump
CoolingBuilt-in fan
Cylinder diameter19 mm
Pressure range3–150 PSI
Rated airflow19 L/min
Pressure unitsPSI, kPa, bar and kg/cm²
Inflation modesCar, motorcycle, bicycle, sports ball and manual
Pressure controlsTarget preset, automatic stop and manual-mode memory
DisplayDual digital pressure readout
BatteryRechargeable battery with 4 × 2,000 mAh cells (8,000 mAh summed cell capacity)
Internal working voltage14.8 V DC
Charging inputUSB-C
Power bank outputUSB
LED modesSteady, slow flash and fast flash
HousingABS
Unit dimensions77 × 57 × 163 mm
Unit weightApprox. 580 g
ColourBlack
Country of originChina

How to Use

Check or Inflate a Tyre

  1. Park safely and look up the recommended cold tyre pressure. For a car, check the driver’s door placard or owner’s manual. For a bicycle or sports ball, use the pressure range specified for that item.
  2. Attach the air hose to the inflator and secure it to the valve. Use the appropriate adapter if needed.
  3. Turn on the unit, select the matching mode and pressure unit, then set the target. The screen shows the current pressure once the hose is connected.
  4. Start inflation. The compressor stops when it reaches the preset pressure. Remove the hose, recheck the pressure as needed and refit the valve cap.
  5. Follow the manual’s operating and cool-down limits, especially when inflating several tyres in succession.

Jump-Start a Compatible Car

  1. Park safely, apply the parking brake, switch off the ignition and turn off electrical accessories. Check that the jump starter is charged and that the vehicle is within the unit’s compatibility limits.
  2. Locate the vehicle’s designated jump-start points. Follow the vehicle and jump starter manuals for clamp polarity, the connection order and the ready indication.
  3. Attempt to start the engine only when the jump starter indicates it is ready. Follow the manual’s cranking and wait limits between attempts.
  4. After the engine starts, disconnect the clamps in the order specified in the manuals and recharge the unit after use.

Charge the Unit and Store It

Charge the unit through its USB-C input before your first trip. Use a charger and cable that meet the input requirements in the manual and check the unit’s charge indicator before putting it away. After using the compressor, jump starter or USB output, recharge it so it is ready the next time you need it.

Store the unit and its accessories together in a dry place within the manual’s temperature range. A car parked in direct sun can become too hot for battery storage. If you cannot keep the unit within its stated limits in the vehicle, take it with you and return it to the car before your next trip.

Frequently Asked Questions

Does the Tyre Inflator Stop Automatically?

Yes. Enter the target pressure and start inflation. The compressor switches off when the reading reaches that setting. If you move to a tyre with a different recommended pressure, update the target before you press Start. You can also connect the hose to check the current pressure without running the pump.

Do I Inflate My Car Tyres to 150 PSI?

Use the recommended cold tyre pressure shown on your car’s door placard or in the owner’s manual. Check the label for separate front and rear values, especially before carrying a full load. The 150 PSI figure is the top of the compressor’s rated range.

Can I Use It for a Bike or a Football?

Yes. Choose bicycle mode for a bicycle tyre or sports-ball mode for a football. Check whether the bike valve connects directly to the hose or needs an adapter. Use an inflation needle for a ball and select the pressure recommended for that ball. Make sure the displayed unit matches the one on the label.

Can It Jump-Start Any Car?

The jump starter is designed for compatible petrol cars. Check your vehicle’s battery system, fuel type and engine size against the compatibility limits in the Firaki manual. Your vehicle owner’s manual will show where to connect the leads for a jump-start.

Can I Charge a Phone with It?

Yes. Connect your phone’s cable to the USB output for a top-up. The amount of charge your phone receives depends on the charge left in the Firaki unit and the phone’s power needs. Plug a compatible charger into the separate USB-C input when you need to recharge the Firaki unit itself.

What Does 8,000 mAh Refer To?

It is the sum of the four 2,000 mAh cell ratings. In use, the amount of charge available at the USB port depends on the output voltage and conversion losses. The number of tyre top-ups you can make also depends on the size of the tyres and how much pressure each one needs.

Will It Fix a Puncture or Recharge the Car Battery?

The inflator restores air pressure and the jump starter supplies a brief boost to crank an engine. If a tyre loses pressure again after a top-up, have it inspected for a leak or damage. If the vehicle starts with a boost but repeatedly needs one, have the battery and charging system checked.

Reviews

There are no reviews yet.

Be the first to review “Firaki Car Jump Starter with Tyre Inflator, 150 PSI”

Your email address will not be published. Required fields are marked *

WhatsApp