Firaki Fin Coil Comb for Car A/C Condensers and Radiators
₨ 999
The Firaki Fin Coil Comb is a handheld tool for straightening lightly bent fins on compatible car A/C condensers, engine radiators, and accessible A/C coils. Use it to reopen air passages in small areas where the fins have folded over. Before buying, check that the comb teeth match the spacing and shape of the fins on your unit.
Prefer to order manually? Chat with our team. Your order is confirmed only after we verify the details.
A small patch of folded fins is easy to spot once you know what to look for. On the face of an A/C condenser or radiator, undamaged fins form an even pattern with narrow openings for air. Where a stone has struck the core or a tool has caught the fins during maintenance, that pattern can flatten into a patch with fewer open gaps. The Firaki Fin Coil Comb lets you work on those individual rows without disturbing the surrounding area.
How the Comb Straightens Fins
The teeth enter the gaps between the fins. As you guide the comb along the rows, the teeth help separate fins that have folded towards one another. Start where the fins are still straight so they can guide the comb into the damaged patch. Work a little at a time. The aim is to reopen the gaps for airflow. Light marks or shallow creases can remain even when the gaps are clear again.
When This Tool Is Useful
Use the comb for a small patch of bent fins caused by road debris, a brush caught during cleaning, or contact while a radiator or condenser was being handled. The best candidates have intact fins that are still attached, with enough space to line up the teeth and make a short stroke. If the core is behind a grille, first check that you can see the fin rows clearly and hold the tool in line with them.
Folded fins restrict airflow where they cover the openings. Straightening them can reopen that part of the core. The overall effect on cooling depends on how much of the core was blocked and whether the rest of the system works properly. If the A/C still blows warm or the engine temperature runs high, a technician can check the cooling fans, airflow through the core, and other causes.
How to Tell When a Core Needs Workshop Attention
Look closely at the tubing beside the damaged fins before working. A damaged tube, an active leak, or a broad section crushed by an impact needs a workshop inspection. Fins that flake or crumble when touched are also a poor candidate for combing. In these cases, the workshop can assess whether the core can be serviced or needs replacement.
Specifications and Compatibility
| Specification | Details |
|---|---|
| Brand | Firaki |
| Tool type | Handheld fin coil comb, also called a fin straightener |
| Operation | Manual |
| Main use | Realigning lightly bent or folded heat-exchanger fins |
| Automotive applications | Compatible car A/C condenser and engine radiator fins |
| Other applications | Accessible fins on compatible A/C condenser and evaporator coils |
| Fit criteria | Tooth spacing and profile, fin pattern, and room to move the comb along the fin rows |
| Suitable damage | Small patches of bent fins on an otherwise sound core |
Where to Use the Fin Coil Comb
Car A/C condenser. The condenser is usually near the front grille, ahead of the engine radiator. This position exposes it to grit and small stones. If there is a shallow patch of folded fins on the accessible face, use the comb along the fin rows after checking the surrounding tubes for impact damage.
Engine radiator. The comb can straighten a lightly bent section on a compatible radiator, such as damage caused while lifting or refitting the core. Check the space between the radiator and nearby parts before starting. You need a clear view of the fins and room to guide the comb along the rows without levering it against the core.
A/C condenser and evaporator coils. The comb can also be used on suitable stationary A/C equipment where the manufacturer permits fin straightening. Check each coil individually, since different coils can have different fin spacing and patterns. If reaching an indoor evaporator requires taking apart the unit, have an A/C technician handle the work.
How to Check Fin Spacing Before Use
Start by looking at a straight area beside the damage. When the coil specification lists fins per inch (FPI), that number describes how closely the fins are packed along one inch of the core. You can also hold a ruler across the fin rows on an undamaged area and count the fins over 25.4 mm. Tooth shape matters as well. A comb can appear to have the right spacing and still catch on a different fin pattern.
For a hands-on check, hold the comb against several undamaged gaps. The teeth should line up together and enter shallowly with little pressure. If only one or two teeth line up or the rest sit on top of the fins, stop and use a comb that matches the core. A forced fit can bend a larger patch than the one you started with.
How to Use the Fin Coil Comb
- Switch off the equipment and let it cool. For a vehicle, switch off the ignition and follow the owner’s manual for working near the electric cooling fan. Keep hands clear until the fan is safe to work around. For stationary A/C equipment, isolate power as directed by its service instructions. Wear gloves to protect against sharp fin edges.
- Clear the immediate area and inspect the core. Gently remove loose debris that hides the rows. Look for damage to the tubes, signs of leakage, or a wide area of crushed fins. Choose a small patch where the fins are still attached and you can see the direction they run.
- Test the comb on straight fins. Check that several teeth line up with the gaps at the same time. Rest the tips near the surface and check that they move freely. Keep the teeth shallow and away from the tubes behind the fin face.
- Start at the edge of the damaged patch. Engage the comb in the straight fins next to the bend and guide it in the direction of the rows. Use short strokes with light pressure, lifting the tool to reposition it as needed. If the teeth bind, back out gently and recheck the spacing or approach.
- Inspect the gaps after each pass. Continue only while the fins are separating cleanly. Stop if a fin tears, crumbles, or stays folded under light pressure. Clear the area of tools and debris before restoring power or starting the vehicle.
Frequently Asked Questions
Will the Fin Coil Comb Fit My Car?
Check the core directly. Two condensers or radiators that fit the same model can have different fin patterns, especially if one is an aftermarket replacement. Compare the tooth spacing and shape on an undamaged part of your core.
Can I Use the Comb Without Removing the Condenser or Radiator?
Yes, where the core face is accessible and you have room to see and follow the rows. Work only on the fins you can reach safely. If the grille, fan assembly, or another heat exchanger blocks the area, a workshop can check how best to access it.
Do I Need to Drain Coolant or Recharge the A/C?
Combing accessible external fins leaves the coolant and refrigerant circuits closed. If access requires removing or disconnecting a system component, have the workshop follow the appropriate service procedure.
Can the Comb Also Clean the Coil?
It may lift loose debris caught between rows during straightening. For packed dust, road grime, or a coil that needs a full wash, follow the equipment manufacturer’s cleaning procedure. Clearing surface debris first also makes it easier to see bent fins.
Can It Fix Leaks or Severely Flattened Fins?
The tool realigns lightly bent external fins. A leaking tube, a section crushed flat, or widespread damage calls for a workshop inspection to determine whether the core is serviceable.
Can I Use It on the Indoor Unit of a Split A/C?
Only where the evaporator coil is safely accessible, the fin pattern matches, and the service instructions permit combing. If the coil is behind covers or requires dismantling, have an A/C technician inspect it.






Reviews
There are no reviews yet.